First, check out our Bar and Pipe cradle trucks. This post will explain them in even further detail Easily move heavy loads of pipes, bars, angles or tubes. Heavy-Duty cradle design facilitates loading or unloading with forklift or hoist. On some trucks caster arrangement allows truck to turn on its own radius. 12″ x 3″ roller bearing phenolic load wheels and 8 x 2″ roller bearing swivel casters. All-welded truck is 28″W and 29″H overall. Also ships with a durable powder coat finish. Rugged, ( 2 or 3-COLUMN ) all-welded construction with 3 load levels. Structural channel uprights with 1-1/2″ square tube arms have 4-1/2″ high stops on ends for load retention. 12-gauge steel lower deck stores and transports smaller part, packages, etc. Platform height 11″, overall height 59. 8″ x 2″ phenolic wheels for ease of movement.
Wheel brakes on all four wheels is available as an option to help prevent unwanted movement. As a result, supports a capacity 4,200 lbs. overall, 1300 lbs. per level evenly distributed. Horizontal storage space (each side): (Top = 6.5″), (Middle = 9.5″), (Bottom = 14.5″). Available with 2 rigid and 2 swivel casters standard. Optional floor lock and wheel brakes are available.
All StandardShelving.com bar and pipe trucks feature durable, all-welded construction that allows for complete versatility and maneuverability. Whether you need a pipe cart or a vertical bar rack for storing long parts, all our products have a powder coated finish that makes hauling heavy loads more efficient. Move and store pipe, channel, bar stock, barrels, or drums with these Heavy-Duty Cradle Carts and trucks. Furthermore, a large open design that makes loading and unloading by fork trucks & slings easy. All welded construction. Ergonomic 20″ Bed Height, Less bending means easier loading and unloading, and keeps material closer to most machine heights. Also, Highly Maneuverable – Four swivel casters with 6″ hard tread phenolic wheels allow movement in any direction.
Useful in tight work areas with long loads and when moving around corners. Up to 4,000 lbs. Capacity Each. Use for both transport and storage. Also, combine multiple units for greater capacity and to support longer loads. And in addition, loads on single units must be center on truck. All welded construction (except casters). 3-Cradle or 4-Cradle trucks with 27″ wide x 14″ high and 3″ x 3/16″ thick flat load supports. Also, 3″ channel steel frame. Overall height – 28″. Heavy-Duty 6″ x 2″ Phenolic swivel casters on the four corners and 10″ phenolic wheels on 1″ axels in the center allow for easy maneuverability. Casters are bolted on for ease of replacement.
More About Our Bar, Pipe and Rail Cradle Trucks
Powder coated gray finish standard. Our 4,000 Lb to 10,000 Lb capacity truck are framed with structural channel, this truck is rock solid. The wide cradles are supported by structural channel on the bottom and both sides. Cradles are 24″ across and 13″ deep to accept large bundles of pipe stock. The large phenolic load wheels are known for exceptional strength and resistance to oil, gasoline and most commonly used solvents and chemicals. Swivel caster at each end and a “tilt pattern” permits the truck to turn in its own radius. All wheels have roller bearings. Capacities based on evenly distributed loads. Gray enamel finish. Shipped assembled. Made in USA.